Motivating Weak Students: A Critical Discussion and Reflection

The motivation of students is regarded as one of the problems in the higher education. One of the reasons for the increasing number of students with low-level of motivation is that there are many students join universities without adequate level of preparation. consequently, because of complex material delivered to students and their low ability to learn quickly, the motivation of students to learn Computer Aided Design (CAD) and other software packages be decreased significantly during educational process. The means of multimedia can be used in teaching the technology to help in solving this problem. The basic idea of proposed approach is to use the video clips, multimedia applications in the teaching process. The basic material should be accessible by students at any time. In order to do this, the material mentioned above should be published in E-learn. These video clips will help students in doing some exercises on their own time and independently which they may miss and can be used by students at later times when they prepare their design work using CAD. The accessibility of material and its possibility to repeat it a lot of time may increase the level of student’s knowledge gained and have improved their motivation. Keywords: Motivation, Diversity, CAD, Technology, Feedbac

Integrating BIM and Planning Software for Health and Safety Site Induction

Project management software packages have been around for quite a long time to help managers to run construction projects effectively. Building Information Modelling – also known as Object-orientated Modelling technology was used at the beginning in architectural design which has become more widespread in structural and services engineering. The development of BIM modelling has made the tool more users friendly. As a result, BIM became widely used by most practitioners in their specialist areas. For health and safety practitioners within construction project management, This tool has not been fully explored. BIM technology has the potential to be used in safety planning procedures particularly those related to tasks on construction sites. The section of the research presented in this paper intend to explore and review health and safety issues on construction site with the sole intension of using better visualisation software to meet the needs of health and safety site practitioners in understanding such H&S problems. A framework needed for better H&S practice on site that may be used actively by all practitioners will be developed. The intension is to find a way forward in addressing ‘real’ health and safety site issues that may not be easy to be understood by practitioners without the full aid of visualisation. Keywords: Health, Safety, construction site, BIM, 4D Modellin

A Qualitative Method for Assessing the Impact of ICT on the Architectural Design Process

During the last thirty years or so, we have witnessed tremendous developments in information and communication technology (ICT). Computer processing power doubles each 18 months, as Gordon Moore predicted during the mid-1960s. The computer and communications world has been revolutionised by the invention of the Internet. It has changed the way of exchanging, viewing, sharing, manipulating and storing the information. Other technologies such as smartphones, wearable computers, tablets, wireless communications and satellite communications have made the adoption of ICT easier and beneficial to all its users. ICT affects the productivity, performance and the competitive advantage of a business. It also impacts on the shape of the business process and its product. In architectural design, ICT is widely used throughout the design process and its final product. The aim of this research, therefore, is to explore the key implication of using ICT in architectural design and what new changes and forms have occurred on buildings as a result of ICT developments and use by architecture practitioners. To achieve this aim, a qualitative research approach was adopted using a narrative review of ICT usage in the design of buildings. The literature found was subjected to a thematic analysis of how ICT adoption affected the architectural design process. The findings of this research indicate that there is a continuous change in the design process and its final products (buildings) as the technology evolves. The framework proposed provides a foundation for gathering evidence from case studies of the impact of ICT adoption by architectural designers. The research proposes that future empirical work has to be conducted to test and refine the relevance, importance and applicability of each of the components of the framework, in order to detect the impact of ICT on the building design process and its final product

Suitability of BIM for enhancing value on PPP projects for the benefit of the public sector

Collaborative integrated working and stakeholder’s interest have been among key drivers that underpin and encourage the use of Building Information Modelling (BIM) within the AEC industry. BIM is becoming a major means to deliver projects with better improved product, and reduced risk within the construction industry. Furthermore, using BIM in areas like buildability, quality assurance, cost and scheduling can be justified through BIM-nD modelling application. What is not so obvious is how the utilisation of BIM visualisation and knowledge embedment will enhance these areas to refine and achieve better value for PPP procurement projects for the long term benefit especially during post-construction phase for the public sector. As of now there is no well-defined guidance with respect to BIM usage incorporating all of the above. Do we really need to revisit the way we specify projects within the contractual framework under PPP? This paper examines the possibility of how BIM can be utilised in the realisation of augmented formal database information management system under the PPP procurement routes with respect to operation and maintenance support. The paper concludes with additional measures that BIM can offer at the post-construction phase for the public sector at learning organisations

An Overview of the Feasibility of Achieving Level 2 Building Information Modeling by 2016 in the UK

The aim of this study is to investigate the current status and feasibility of achieving Level 2 BIM (building information modeling) usage that is to be made mandatory by the UK government on its projects by the year 2016. This study assesses the level at which organizational and practitioner knowledge of BIM is currently positioned. The UK government, being the largest public stakeholder client, has realized the benefits and advantages of BIM when used in procuring projects across their lifecycle in the built environment. A critical review of the BIM literature was carried out and the evidence base was created in relation to government targets for 2016. At the current stage, Level 2 BIM adoption is achievable by 2016 for large construction firms but not for SMEs (small medium enterprise). Also, from evidence in this study, the technology needs to be properly tailored to meet SME variables if Level 2 status is to be achieved for the entire industry

Achieving Level 2 BIM by 2016 in the UK

The growth and advantage of Building Information Modeling (BIM) has recently gained momentum in the expanding needs of the construction industry, one that varies across disciplines. The UK government is the largest public stakeholder client that has realized the benefits and advantages of BIM when used in procuring projects. The usage and adoption of BIM in all UK government-procured projects with a Level 2 BIM status will be mandatory by 2016. Will this target be achievable by 2016? This study investigates that possibility. A critical review of the BIM literature was carried out and the evidence based on the government target of 2016. At the current stage, it appears that Level 2 adoption is achievable by 2016 for large construction firms. However, the technology needs to be properly tailored to meet SMEs variables, if the Level 2 status is to be achieved for the entire industry

Involvement of People in the Design of Community Building in Developing Countries

Although public participation concept or technique to enhance and /or influence decision making is a fact of life in many governments nowadays and has been used by many industries to improve their products and increase end-users satisfaction, it is still new to the Architectural, Engineering and Construction (AEC) industry. The extent to which participation should occur and the role that it plays still remains uncertain in the AEC industry. Participation has been the predominant conception for many years by many researchers. In practice, this has meant that public participation often has occurred late in the planning process. This research will focus on the involvement of people in the design process of community buildings in developing countries. During the last five decade, many community buildings were built and many of these buildings did not performed well as planned. Many of these problems in were related to design, hence the choice of architectural design of these buildings for this research. If the end-users of these buildings were involved in the planning and design stages, many of these problems would not occur. Thus, the aim of this research is to develop a conceptual framework to involve the public in the design of community buildings in developing countries. A thorough review of previous works related to the public participation in the design of community buildings has been conducted as part of this research. The review revealed most of these works in this area were done on developed countries and no research works were conducted on developing countries so far

BIM and project planning integration for on-site safety induction

Purpose – The section of the research presented in this paper reviews and explores health and safety (H&S) issues on construction sites. It has the sole intention of using better computer visualisation to meet the needs of site practitioners in understanding such H&S problems. Design/methodology/approach – The methodology follows a traditional literature review approach to understand the development of BIM technology up to its current status. A questionnaire survey was conducted to gather information on the embedding of H&S planning by site practitioners within the BIM environment. Findings – BIM has the potential to be used in H&S planning procedures, particularly in those related to tasks on construction sites. A framework for an integrated visual tool is developed for better H&S practice on site. It may be used actively by all practitioners, starting with site induction, and addresses, inter alia, personal hazard perception. Research limitations/implications – This paper provides a foundation for developing a tool that helps construction personnel explore potential H&S risks on site before construction begins. By introducing a framework for integrating BIM and project planning, a prototype can be developed to demonstrate the application of the proposed framework. Originality/value – The research presented in this paper introduces BIM usage during the construction stage as a tool that supports a H&S toolbox. The paper proposes the useful framework for better H&S practice on site that can be used actively by all practitioners. The intention is to find a way forward in addressing ‘real’ H&S site issues that may not be easily understood by practitioners without the full aid of visualisation scenarios

INNOVATIVE INTEGRATION OF MODERN TECHNOLOGIES FOR HEALTH AND SAFETY DECISION MAKING IN THE CONSTRUCTION INDUSTRY

Health and Safety (H&S) has been one of the key issues in the design and implementation of projects within the construction sector. At the design stage of a project, usually designers are accused of failing to appreciate most of the construction processes that will optimise safety and minimise cost. Therefore, clients and other stakeholders are apprehensive as to whether the designer’s input should be fully integrated through other known ways. Also, within a continuation in the downstream end (i.e., construction and facilities management) professional processes used are not fully appreciated by designers. As such these sets of practitioners need to learn fully from each other and integrate their knowledge and skills to close the existing knowledge gap among practitioners. Modern technological innovations have given us new ways of understanding and finding solutions to such existing problems with most professionals working in a collaborative way. Such collaborative ways can enhance learning and cross pollination of professionals within an organisation and across organisations. However, the evidence through data collection is not captured across projects. This conceptual paper aims to integrate modern Artificial Intelligence (AI) and other software applications (such as BIM, IoT, and Digital Twins) to be used within the construction industry setting to understand and augment the learning of all practitioners. An exploratory qualitative research approach through literature review is used in the development of the conceptual framework for the implementation of H&S management that will inform future detailed developments of this proposed innovative approach

Background and approach to a definition of smart buildings

There is no possibility of finding a single reference about domotics in the first half of the 20th century. The best known authors and those who have documented this discipline, set its origin in the 1970’s, when the x-10 technology began to be used, but it was not until 1988 when Larousse Encyclopedia decided to include the definition of "Smart Building". Furthermore, even nowadays, there is not a single definition widely accepted, and for that reason, many other expressions, namely "Intelligent Buildings" "Domotics" "Digital Home" or "Home Automation" have appeared to describe the automated buildings and homes. The lack of a clear definition for "Smart Buildings" causes difficulty not only in the development of a common international framework to develop research in this field, but it also causes insecurity in the potential user of these buildings. Thus, the main purpose of this paper is to propose a definition of the expression “Smart Buildings” that satisfactorily describes the meaning of this discipline. To achieve this aim, a thorough review of the origin of the term itself and the historical background before the emergence of the phenomenon of domotics was conducted, followed by a critical discussion of existing definitions of the term "Smart Buildings" and other similar terms. The extent of each definition has been analyzed, inaccuracies have been discarded and commonalities have been compared. Throughout the discussion, definitions that bring the term "Smart Buildings" near to disciplines such as computer science, robotics and also telecommunications have been found